Syringe Pump

FNM syringe pumps are designed as a low-cost unit, capable of holding 1 to 6 syringes of any make from 100μl to 60ml. These syringe pumps are ideal for delivering accurate and precise amounts of fluids for a multitude of syringe pump applications including electrospinning, infusing calibration into a mass spectrometer or reaction chamber, long term drug infusion to animals and general infusion applications.

Features:
 Bright display user-friendly interface
 Continuous flow of stream
 Injection capability in microliter (µl) scale
 Non-volatile Memory
 Programmable (depending on the model)
 Windows-based Software (depending on the model)
 Appropriate for high-viscose substances (more than 5 bars: HSH series)
 Injection and alarm as soon as the desired volume is completed (in HPM and HSM series)
 Dual pump is available (200 series)
 Autofill capability (HPM and HSM series); with optional electric valve
 Infuse/refuse capability (HPM and HSM series)


Software (Windows platform)
The programming functions of HSM series provide powerful capabilities for advanced experiments. While in program mode, the pump could perform the following tasks at a predetermined time or when prompted by a signal from an external device:
• Start or stop pumping (injection)
• Change pumping (injection) direction (infuse-withdraw)
• Change flow rates
• Pump (Inject) a precise volume and stop
• Ramp-up or downflow rates
• Inject according to a custom formula
The abovementioned functions can be linked into powerful programs in the “Program” mode to simplify your automation projects (commands are available).

FNM Syringe Pump nomenclature:
SPXYY ABC
X: one mechanical system (1), two mechanical systems (2)
YY: Max. Syringe lines (1, 2, 4 or 6)
A: PLC control with touch screen (T), micro control with LCD (L)
B: Not programmable (O), Internal programmable (P), Software and internal programmable (S)
C: Medium pressure (M), High pressure (H)

Common and Best-Selling Syringe Pump Models:
SP102 LPM: Syringe pump with 1 motor, maximum 2 syringes, micro control and LCD, internally programmable, medium pressure
SP102 TPH: Syringe pump with 1 motor, maximum 2 syringes, PLC control, and touch screen, internally programmable, high-pressure
SP204 TPH: Syringe pump with 2 mechanical systems, maximum 4 syringes, PLC control, internally programmable, high-pressure
SP101 TPH: Syringe pump with 1 mechanical system, maximum one syringe, PLC control, internally programmable, high-pressure
SP202 TPH: Syringe pump with 2 mechanical systems, maximum 2 syringes, PLC control, internally programmable, high-pressure

Description
Input Power: 100-240V AC, 50-60 Hz.
Number of Syringes: Up to 1 (SP101 series) / Up to 2 (SP102 series) / Up to 6 (SP106 series)
Display: 4 lines, 20 characters LCD display or 4.3 Touch screen panel
Nonvolatile Memory: Stores syringe inner diameter, rate, target volume, programs and settings
Syringe Type: Plastic, metal or glass
Minimum Flow Rate: 1 μl/hr using a 10μl syringe (barrel diameter: 1 mm)
Maximum Flow Rate: 100 ml/min and 450 ml/min

Linear Force (Max): 25 kg (in M series); 50 kg (in H series); measured at the 120 ml/hr injection rate
Drive Motor: 1.8° Stepper Motor
Motor Drive Control: Microprocessor with 1/128 micro stepping
Connectors: USB (S Series)
Operating Temperature: 0 – 45 °C
Storage Temperature: 0 – 45 °C
Method of Operation: Continuous
Warranty: 18 months

Typical Applications:
• Cell injection
• Controlled drug injection
• Electrospinning
• Controlled reactive injection into the reactor
• Lab on a chip